Alkyd enamel, colored enamel, custom enamel alkyd enamel consists of: alkyd resin, pigments, driers, solvent modulation. Product Features Key Features: colorful, bright, good weather resistance, high gloss, hard-degree and other characteristics. Product use Uses: mainly used to require a relatively high metal products, instrumentation and protection of decorative wood surfaces. Warranty: 1 year Drying time: dry ≤1.5h; hard work ≤24h; coating interval: 2h construction requirements: 1) to be coated surfaces should be smooth and free of grease. 2) to be coated if potholes filled putty application, polished smooth. 3) should be the main spray, brush, roller should be, but detrimental to shine. Product use enamel enamel Occasion Applications: electronics factory, electrical plants, for Parking, beverage factories, garment factories, cosmetic factories, supermarkets, offices and other construction range [product] enamel paint Construction reference: 1, enamel paint before the substrate to be coated handle clean, prevent moisture, dust and other contaminants in order to ensure the existence of the film adhesion. 3, enamel paint coating reaches a predetermined thickness, requiring constant temperature to dry two days later. 2, when enamel paint paint construction, according to the construction needs (such as brushing, spraying) can dilute the special thinner. 3, enamel paint to strengthen the construction of ventilation to prevent poisoning. Construction site to prevent fire, to prevent fires. 4, enamel paint effective storage period is one year, exceeding the shelf life may be the standard test, in line with the price in accordance with the provisions of alkyd enamel colors, packaging specifications, a quantification bargain. The composition containing a large amount of freight alkyd enamel alkyd resins, driers, pigments, solvents preparation. Characteristics of alkyd enamel with good weather resistance, gloss and hardness, bright colors, metal, wood, good adhesion, and have some water resistance. Technical Requirements Item Specifications Test Method state after mixing vessel without lumps, showed a uniform state GB3186-1988-4.3 drying time, h is not greater than dry 8 GB / T1728-1989 hard work 15 GB / T1728-1989 viscosity, S is not less than 35 GB / T1723-93 fineness, μm is not more than 20 GB / T6753.1-1986 hiding, g / m2 is not greater than 120 GB / T1726-1989 bending test, mm no more than 3 GB / T6742-1986 water resistance, 8h no blistering, cracking, spalling. Allowing a slight whitish. After soaking gloss of not less than 80% HG / T2576-1994-6.14 volatile oil resistant, 6h no bubbles, no wrinkles, no cracking, no peeling. HG / T2576-1994-6.15 construction Reference 1, brush, roller coating, spray coating, high pressure airless spray can. 2, after the product, stir in the primed surface of metal or wood construction, each coating thickness 15-20μm appropriate, after a dry before the next one can be painted. 3, supporting the use of alkyd enamel primer, epoxy ester primer, such as phenolic primer. 4, in order to ensure the construction quality, we recommend using a thinner.